97 cavalier ccs100 problems

Home / the12volt's Install Bay / Cruise Controls / 97 cavalier ccs100 problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

drwambo

Member - Posts: 2

Joined: April 06, 2009

Posted: April 06, 2009 at 10:53 AM / IP Logged

Hello all,

I am fighting an issue I don't understand. I can get the cruise to set, but only momentarily - it grabs the pedal and then shuts down immediately. I have checked all of the wiring and everything seems to be ok. Used the small vacuum line that goes into the cabin for vacuum. I have used the GREEN / WHITE wire and white wire on the PCM for VSS and tach respectively. LED inside unit tests fine - brake connections are fine, etc. All of the switches but 1 and 3 are set to off.

Any help would be greatly appreciated as this is driving me CRAZY!

Thanks

Back to Top

drwambo

Member - Posts: 2

Joined: April 06, 2009

Posted: April 08, 2009 at 8:27 AM / IP Logged

Still haven't figured this out. The cruise will grab for a moment and then immediately disengage. Is it possibly a lack of vacuum? Has anyone else from about 97-03 installed one of these on their 2.2L Cavalier? Did you need the vacuum cyl as well? Where did you tap the vacuum.

Thanks again all.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 cavalier ccs100 problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.