the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

cruise control light stuck on? del sol si


Post ReplyPost New Topic
< Prev Topic Next Topic >
shailoche 
Member - Posts: 3
Member spacespace
Joined: April 29, 2009
Location: Texas, United States
Posted: April 29, 2009 at 8:26 PM / IP Logged  
I have a 1993 Honda Del Sol Si manual transmission. For some reason my cruise control light is stuck on. I replaced the VSS since the speedometer wasn't working. I replaced the rear brake light bulbs to make certain that they are working. For some reason the cruise control light is still stuck on and I cannot make the cruise control function.
Does anybody know what could cause this to happen? Is there a solution? Do I need a new cruise control module or I am just missing something simple?
Please, can you help a new guy out?
shailoche 
Member - Posts: 3
Member spacespace
Joined: April 29, 2009
Location: Texas, United States
Posted: April 30, 2009 at 9:55 PM / IP Logged  
Bump? Anybody have any ideas at all?
I remembered that just before this problem started I had unplugged the underhood servo actuator from the engine wiring harness. Could that have had an effect on the system?
i am an idiot 
Platinum - Posts: 13,667
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: May 01, 2009 at 5:38 PM / IP Logged  
Try disconnecting the battery for a while.  This may reset the control module of the vehicle.  If you unplugging the servo caused the problem, this may clear it up.
shailoche 
Member - Posts: 3
Member spacespace
Joined: April 29, 2009
Location: Texas, United States
Posted: May 01, 2009 at 5:56 PM / IP Logged  
I will give that a try. I had the battery cables off when I pulled the electrical wiring from the servo motor but don't remember if I had them connected when I replugged the server motor in. So, it is worth a try.
Also, could it be related to my tail lights? Both my tail lights were burned out. I replaced the bulbs but when I did I noticed that my passenger's side bulb socket had some corrosion inside of it. So, if that wasn't perfectly clean could that cause this type of problem?
As always any help is appreciated.
I have been lurking on this site for at least 6 months and just never had an issue to ask about. So, thanks for those who will help a forum newb.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer