cruise control for 94 chevy truck

Home / the12volt's Install Bay / Cruise Controls / cruise control for 94 chevy truck (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Steve B 1998

Member - Posts: 1

Joined: February 02, 2003

Location: United States

Posted: February 02, 2003 at 7:05 PM / IP Logged

My cruise contol on my truck stopped working. what can i look for

Steve Bauer

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: February 02, 2003 at 7:58 PM / IP Logged

It is most likely the lever (turn signal cruise lever). It could also be the stepper motor under the hood. You can do a few power tests to see if the switch is good. If you go to a gm dealer they will have a kentmoore tester that plugs in at the stepper motor and tests the electrical. You can also sometimes buy these testers on ebay for around $100. If you buy a service manual it should have a step by step procedure to diagnose the problem.

Also check to make sure your brake lights work and check to make sure the brake switch is adjusted properly.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

cruise control for 94 chevy truck

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.