polyfil in a sealed enclosure

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / polyfil in a sealed enclosure (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jurb

Member - Posts: 39

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 23, 2007

Location: United States

Posted: January 14, 2008 at 8:46 AM / IP Logged

this is a stupid question but i could not find the answer after looking through the forums. i want to put some polyfil into a new enclosure i just built, does the polyfil simply get stuffed in the box? i worry that it will interfere with the sub and possibly burn if the sub gets too hot. if not, are you supposed to fix it to the walls?

Back to Top

speakermakers

Copper - Posts: 231

Joined: January 02, 2003

Location: United States

Posted: January 14, 2008 at 11:46 PM / IP Logged

Most people just stuff it in the box. The thermal limitations of poly fill is about the same as the materials that your sub is made out of. Of coarse every situation has its own intricacies. If you find a need for fastening the poly fill by all means do it.

Back to Top

bellsracer

Silver - Posts: 703

Joined: January 14, 2006

Location: United States

Posted: January 18, 2008 at 12:51 AM / IP Logged

Just as long as the polyfil isn't pushing against the sub or applying too much density near the subs vents (if equipped) then there is no worry just as SM said.

Oh and by the way, the only stupid questions are the ones you never asked. We're all here to help noob and veteran alike. So don't feel bad about any question (unless it's already been answered >.<)

Ganbatte ne!

Never send your ducks to eagle school.

The difference between ordinary and extraordinary is that little extra.

The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

polyfil in a sealed enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.