04 durango fiberglass enclosure

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / 04 durango fiberglass enclosure (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

maryland33

Member - Posts: 33

Joined: February 05, 2009

Location: Maryland, United States

Posted: February 05, 2009 at 1:12 PM / IP Logged

I have a 2004 dodge durango and i was looking for tips on building a fiberglass enclosure and amp rack where the storage compartment is,if possible.1 10"orion p10d4 and an alpine mrp-m850 mono amp. 04 durango fiberglass enclosure -- posted image.

04 durango fiberglass enclosure -- posted image.

any help would be appreciated!

ryan95x

Member - Posts: 24

Joined: February 01, 2009

Posted: February 06, 2009 at 12:18 PM / IP Logged

Have you measured the area and do you have any pictures?

-Dual XHD6425 - HD Radio w/USB & 3.5mm in

-Power Acoustik PS4-840

-Infinity Components

-10" Clarion SW1051 in FG molded box

maryland33

Member - Posts: 33

Joined: February 05, 2009

Location: Maryland, United States

Posted: February 06, 2009 at 12:39 PM / IP Logged

im looking at roughly 46" wide,17"deep and about 9"heighth. pics coming this afternoon.

maryland33

Member - Posts: 33

Joined: February 05, 2009

Location: Maryland, United States

Posted: February 06, 2009 at 8:31 PM / IP Logged

ok i tried to upload pics of the space i have to work with,but apparently they are too large and i cant,i am officially at a loss.

ryan95x

Member - Posts: 24

Joined: February 01, 2009

Posted: February 07, 2009 at 12:06 AM / IP Logged

That's a good amount of space to work with. The pictures can be difficult sometimes, try uploading them to photobucket.com. They have a fairly simple editing tool that you can resize pictures with.

-Dual XHD6425 - HD Radio w/USB & 3.5mm in

-Power Acoustik PS4-840

-Infinity Components

-10" Clarion SW1051 in FG molded box

maryland33

Member - Posts: 33

Joined: February 05, 2009

Location: Maryland, United States

Posted: February 07, 2009 at 8:03 AM / IP Logged

after this i think im done,try this.http://photobucket.com/maryland33/?albumview=slideshow

ryan95x

Member - Posts: 24

Joined: February 01, 2009

Posted: February 07, 2009 at 10:02 PM / IP Logged

Here are a few of the pictures for you. Are you planning on using fiberglass and/or wood? Also, are you wanting it to be hidden once you close the door to the storage compartment or are you ok with it sticking up?

04 durango fiberglass enclosure -- posted image.

-Dual XHD6425 - HD Radio w/USB & 3.5mm in

-Power Acoustik PS4-840

-Infinity Components

-10" Clarion SW1051 in FG molded box

maryland33

Member - Posts: 33

Joined: February 05, 2009

Location: Maryland, United States

Posted: February 08, 2009 at 7:28 AM / IP Logged

Initially i wanted to use just the storage compartment,but i dont think there is enough depth so im gonna build up and make a false floor,i do have 3 kids,space and storage are needed,atleast some.I do also have the area where the factory subwoofer is but i think for one 10" its just not worth it.We'll see, hopefully monday my amp will be in and i can lay it all out.Oh yeah,i appreciate the help on the pics.

ryan95x

Member - Posts: 24

Joined: February 01, 2009

Posted: February 08, 2009 at 12:15 PM / IP Logged

If it's an option, I think a shallow mount sub like the Clarion SFW1051 (3" top mount depth) would fit nicely in there and allow you to keep the compartment door. Were you going to use fiberglass for the bottom half?

If you were going to stick with the orion sub and you were willing to hack the compartment door a little, mabye you could cut out a hole for the sub to peak through and use a heavy duty speaker grill (good variety on ebay) to protect it?

-Dual XHD6425 - HD Radio w/USB & 3.5mm in

-Power Acoustik PS4-840

-Infinity Components

-10" Clarion SW1051 in FG molded box

maryland33

Member - Posts: 33

Joined: February 05, 2009

Location: Maryland, United States

Posted: February 08, 2009 at 12:36 PM / IP Logged

No cutting here,atleast on the compartment door,but i'm thinking about a piece of mdf for a top plate and fiberglass the base.Raising the floor a few more inches is probably whats going to happen,we'll see when this amp comes in so i can lay it all out,good idea on the grill material,the home depot here has some of the same thickness material but with patterns,just a thought though.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.