94-97 Intrepid owners please help!

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / 94-97 Intrepid owners please help! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wlg83

Copper - Posts: 60

Joined: June 20, 2002

Location: United States

Posted: September 29, 2003 at 4:27 AM / IP Logged

I am in the process of acquiring a set of front seats for my car, coming from a model with the center console/floor shifter. In the meantime, I am planning a custom console to reach from the lower dash to the back seats. Here is where I need help. <p>

PLEASE, if you have one of the 94-97 Intrepid models with the floor shifter, measure the distance between the seats. It will only take a minute and brighten a fat kid's day. Thanks in advance for any help.

waffalobill

Member - Posts: 13

Joined: October 04, 2003

Location: United States

Posted: October 04, 2003 at 12:47 AM / IP Logged

I have a 95 Intrepid. If you still need this info let me know what and were exactly you need measurements taken from.

I think I see Light!

wlg83

Copper - Posts: 60

Joined: June 20, 2002

Location: United States

Posted: October 06, 2003 at 12:06 PM / IP Logged

Great! I am in need of the measurements between the closest points of the front seats so that I can figure the maximum width of a center console. The other measurements will be the same for the seats that I currently have in there. It is, as always, much appreciated

waffalobill

Member - Posts: 13

Joined: October 04, 2003

Location: United States

Posted: October 07, 2003 at 1:48 AM / IP Logged

I measured from the top of the cushions at the front at the closest point and got 8 inches. If you need any other measurements let me know. Its not a problem.

I think I see Light!

waffalobill

Member - Posts: 13

Joined: October 04, 2003

Location: United States

Posted: October 07, 2003 at 1:49 AM / IP Logged

By the way my drivers seat is powered if it makes any difference.

I think I see Light!

wlg83

Copper - Posts: 60

Joined: June 20, 2002

Location: United States

Posted: October 09, 2003 at 3:54 AM / IP Logged

Waffalobill, much thanks. Thats all I needed. Now, if the mechanic ever gets my car back to me, I will begin the project.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

94-97 Intrepid owners please help!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.