Monitor housing

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Monitor housing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hbk00

Copper - Posts: 64

Joined: November 11, 2003

Location: United States

Posted: November 26, 2003 at 5:36 PM / IP Logged

Just need a pointer or two and maybe a link to some pics. I have a 6"monitor with headrest shroud and I want to mount it on my dash on the passenger side. Now I now I can rig a housing up out of wood but I don't want it to look real plain ya know? And I need to leave somewhat of a hole in the "housing" to pass wires through, (obviously), does anyone have any ideas, maybe somthing else to make a housing out of so I can be a little more custom persay so it just doesn't look like a fiberglassed rectangle sitting on my dash. Any tips would be helpfull!! Thankx in adavnce

go custom or go home!!

kustomcarluvr

Copper - Posts: 73

Joined: April 25, 2003

Location: United States

Posted: November 26, 2003 at 5:47 PM / IP Logged

Hey, I would still say to go with the wood idea, but frame out the wood with the look and design that you want and then fiberglass it.

Matt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Monitor housing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.