tunning enclosures

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / tunning enclosures (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ulozano

Member - Posts: 3

Joined: January 10, 2004

Location: United States

Posted: January 25, 2004 at 3:20 PM / IP Logged

what is the best frequency to tune enclosures for spl?

I have 2 juggernaut 15's it calls for 4.5 cubic feet with a 50 square in. x 16 L

this is net space but this is what i dont understand....

3" round port equals 7.07 square inches - 4" round port equals 12.56 -

6" round port equals 28.26 square inches....this sounds confusing i have sufficent space just need some help?

Take your time do it right.

audiokid1

Copper - Posts: 142

Joined: March 17, 2003

Location: United States

Posted: February 01, 2004 at 6:03 PM / IP Logged

it's just pie r squared since you are dealing with round ports

example for a 3" round port: 1.5x1.5x3.14..... = 7.07square inches

ulozano

Member - Posts: 3

Joined: January 10, 2004

Location: United States

Posted: February 01, 2004 at 10:15 PM / IP Logged

Yeah but im planning on doing a square port so a 50 square inch port is 18.5 x 2.75=50.8 -----x 16 length is this right?

Take your time do it right.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

tunning enclosures

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.