wiring subs in a glassed box

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / wiring subs in a glassed box (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

kiteman

Copper - Posts: 98

Joined: January 14, 2004

Location: United States

Posted: March 22, 2004 at 12:16 PM / IP Logged

I'm building a fiberglass box, with 2 firing out and, and 2 firing in. when wiring up the two firing out are they just drilling into the enclosure, and sealing it from the inside?

Back to Top

sam1

Copper - Posts: 151

Joined: March 03, 2004

Location: United States

Posted: March 22, 2004 at 12:23 PM / IP Logged

Im using connectors glassed into place so its pretty and not just a glued up hole. but that would work you cant see the wires.

Back to Top

kiteman

Copper - Posts: 98

Joined: January 14, 2004

Location: United States

Posted: March 22, 2004 at 12:33 PM / IP Logged

That's a good idea. Thanks that might make things a little easy down the road.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring subs in a glassed box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.