Fiberglass inclosure

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Fiberglass inclosure (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Phat8186

Member - Posts: 5

Joined: June 02, 2003

Location: United States

Posted: May 10, 2004 at 11:39 PM / IP Logged

Ok I was thinking about making my own fibergalss inclosure in the trunk of my accord. Right now i made my own sealed box for my two 12's. I have instructions on how to go about making a fiberglass inclosure. What I dont understand is when there are nermerous curves, unlike when making just a regular box. How do you know how big to make the inclosure for the subs. I know this might sound like a noob question. But I wouldnt even know how to measure the cubic feet for each sub.

Please help I am really really new at this

Back to Top

93accordSE

Copper - Posts: 203

Joined: February 19, 2004

Location: United States

Posted: May 11, 2004 at 12:08 AM / IP Logged

Well, in order to go about finding the volume, there are different methods. One method is to fill a 1 cu. ft. box with packing peanuts and fill your box up to get a good estimate. What year accord do you have?

Back to Top

sam1

Copper - Posts: 151

Joined: March 03, 2004

Location: United States

Posted: May 11, 2004 at 9:52 AM / IP Logged

well, to use the peanuts, you have to be finished with the box. if your just planning one, id say break your design down into two smaller portions. hopefully a rectagular one and a triangular one. for some you might even end up with two triangular portions. then you can find the volume of each portion and add them together. if you look in the volume calculator on this site youll kinda see what im talking about. hope this helps.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Fiberglass inclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.