Door panels

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Door panels (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

septicdeath

Copper - Posts: 60

Joined: February 13, 2004

Location: United States

Posted: June 10, 2004 at 3:43 AM / IP Logged

Hello all, I was wondering if someone knew of a replacement door panel location on the internet. I want to start trying to "re-do" the bottom half of my 98 expedition doors, or possibly toy with a complete skin fof the entire door. However, I would feel much more comfortable knowing I had a replacement if I needed it when it comes time to start working with the original.

Lots of glass questions to come, I've been reading where maddog and fishman do complate door panels by using 1/4" mdf panel and then 3/4" mdf for the lip and start at that point, but I cant invision getting the correct entire panel created and replaceing the original like they do, now something that adds onto the existing "skining" the original sounds more doable, anyone ever do it? I mean I've done the Old 1/4" panels for square controless Toyota pickups, but never anything with so much contour and movement..

Thanks

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 10, 2004 at 12:59 PM / IP Logged

If you are going to redo them then go to a junkyard and buy the panels there and use them to play with. There are a couple of ways to do a complete panel, you can do it the way that you mentioned or you can fiberglass the base instead of using wood and build from there.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Thack79

Silver - Posts: 526

Joined: December 02, 2003

Location: Virginia, United States

Posted: June 10, 2004 at 2:07 PM / IP Logged

I doubt seriously you will be able to find them in a junkyard. Your best bet is ebay. I saw some on ebay and i took a look at these panels. Thought it would give you some ideas http:///.com/ebaymotors/dll?ViewItem&rd=1&item=2481404544&category=38646

drunkenbreaker

Member - Posts: 29

Joined: June 03, 2004

Location: United States

Posted: June 12, 2004 at 3:05 AM / IP Logged

You should be able to find them at a junkyard. find a junkyard with a good inventory that way you can just call them and they'll be able to tell you right away. Definately check ebay.

Search for other posts by drunkenbreaker

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door panels

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.