Fiberglass Resin and Foil

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Fiberglass Resin and Foil (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

vdubmk4

Copper - Posts: 175

Joined: August 04, 2004

Location: United States

Posted: August 08, 2004 at 6:12 PM / IP Logged

I got some non-stick aluminum foil, it seems to be very non stick, duct tape comes off very easily. How bad or not bad do yall think resin will take to it. The idea is for it not to stick at all.

Fortune: You will continue to take chances, and be glad you did.

Back to Top

archemedes

Copper - Posts: 172

Joined: September 08, 2003

Location: United States

Posted: August 08, 2004 at 6:14 PM / IP Logged

it may stick some, why not use a release film, or even wax paper?

Back to Top

vdubmk4

Copper - Posts: 175

Joined: August 04, 2004

Location: United States

Posted: August 08, 2004 at 6:58 PM / IP Logged

I thnk since i already have it im just gunna gun it down with some Pam of wd40 then wipe off the excess.

Fortune: You will continue to take chances, and be glad you did.

Back to Top

ANeonRider

Member - Posts: 34

Joined: December 03, 2003

Location: Canada

Posted: August 08, 2004 at 7:06 PM / IP Logged

That's what I did, just gave it a good healthy shot of WD40, didn't have any problems getting the tape & foil off.

Back to Top

cornfedmancow

Member - Posts: 16

Joined: August 06, 2004

Location: United States

Posted: August 09, 2004 at 11:22 AM / IP Logged

you could also try a silicon spray or butter/lard, or even crisco.

Pam or WD40 are good. Anything that acts like lube (keep your mind out of the gutter)

Anyway, good luck with the glassing

Eagles may soar - but weasles don't get sucked into jet engines.

Back to Top

CarAudioHelp

Copper - Posts: 198

Joined: July 18, 2003

Location: United States

Posted: August 10, 2004 at 11:20 AM / IP Logged

Cooking spray always works for me. I like the butter flavor. Mmm, butter.

Back to Top

archemedes

Copper - Posts: 172

Joined: September 08, 2003

Location: United States

Posted: August 10, 2004 at 4:00 PM / IP Logged

makes your stuff taste better too :)

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Fiberglass Resin and Foil

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.