resin

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / resin (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

boxmaker85

Silver - Posts: 433

Joined: September 19, 2004

Location: United States

Posted: September 28, 2004 at 7:06 PM / IP Logged

How much resin should I need for a box that's goin to be sealed and have 2 10" subs. The back and sides will be mdf so just the top/front will be fg. I'll probably be laying 7 or eight layers of 1.5 oz. fg. Thanks

boxmaker85

Silver - Posts: 433

Joined: September 19, 2004

Location: United States

Posted: September 28, 2004 at 7:08 PM / IP Logged

Oh and it will be approx. 40" wide by 11" high by 9" deep (if it were square. this is what i'm approximating my box volume off of).

ambientshadow

Member - Posts: 2

Joined: October 04, 2004

Location: Canada

Posted: October 04, 2004 at 10:40 PM / IP Logged

a quart should do you, you might need a bit more if you get resin-happy. i'd buy two just in case, and get resin-happy intentionally :D

boom.

CarAudioHelp

Copper - Posts: 198

Joined: July 18, 2003

Location: United States

Posted: October 05, 2004 at 8:56 AM / IP Logged

A quart? I don't think so. You'll need at least a gallon, maybe two if you really thicken the box up. My gut tells me two gallons based on the number of fiberglass layers you're planning.

boxmaker85

Silver - Posts: 433

Joined: September 19, 2004

Location: United States

Posted: October 05, 2004 at 11:20 AM / IP Logged

I was thinkin round 1.5 gal. But not sure w/ the amount of layers. Probably goin to do just one 10" sub now. So probably one gal for that right? Thanks.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

resin

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.