Magic Mixture

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Magic Mixture (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

97blackrodeo

Member - Posts: 34

Joined: May 27, 2005

Location: United States

Posted: July 07, 2005 at 5:31 PM / IP Logged

i have done a few fg projects but none using the magic mixture(resin/filler/hardener). I used it for the first time and was surprised with the results. My question is this. On the last skim coat, i didnt use enough hardener. Now i have a fairly large area that is still tacky. What should i do? I was thinking mixing some liquid hardener with acetone and trying that, but im not sure. Any help would be appreciated.

Back to Top

abovestock

Copper - Posts: 247

Joined: June 08, 2005

Location: United States

Posted: July 08, 2005 at 2:22 AM / IP Logged

Either heat it up in the sun for a couple of days if at all possible or scrape all you can off with a plastic spreader and remove the rest with acetone and a rags.

Back to Top

us_test

Copper - Posts: 200

Joined: May 21, 2005

Location: United States

Posted: July 08, 2005 at 10:52 AM / IP Logged

What is you Miracle MIX formula. I've used this many times. I go 1 to 1 resin to Rage Gold + 8-10 drops of resin hardener + 1 thin 6 inch line of Rage hardener for a small batch. Try this over as the last coat, it worked for me many times on tacky surfaces before.

(1) Kenwood Excelon Head Unit KDC-X589 (24 bit Burr Brown DAC, 3 X 4 volt RCA).

(1) RF Punch 250A2 - running the components.

(1) Hifonics 6.5" Atlas Components (18db crossovers).

Back to Top

modena0

Copper - Posts: 85

Joined: July 18, 2004

Location: United States

Posted: July 08, 2005 at 11:29 AM / IP Logged

i just used it the other day and i used MEK to thin it out a little more for a glaze coat. worked mint, sanded nicely. i tend to mix a little more rage if i want it more solid and a little less if i want it more soupy. the MEK if i need it even soupier.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Magic Mixture

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.