Rock Candy in my resin!

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Rock Candy in my resin! (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: September 22, 2005 at 9:57 PM / IP Logged

I just got done mixing a quart of Boat Yard Resin with Evercoat hardner.

I mixed it pretty damn thouroughly... but after about 5 minutes or so I started to get little chunks floating around in the resin that had the consistency of gummy bears and then gradually changed to the consistency of curred silicone.

Now will all of the resin that I spread cure or will it just stay soft/wet or whatever?

Did I mix the hardener and the resin well enough? How do you all mix the hardener with the resin?

What should I do?

TCalYen

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 22, 2005 at 10:31 PM / IP Logged

Sounds like you could have mixed it a little bit more. Some of the resin gelled. Not a real big deal just more sanding in spots.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

TCalYen

Copper - Posts: 145

Joined: June 15, 2004

Location: Florida, United States

Posted: September 23, 2005 at 12:10 AM / IP Logged

auex wrote:

Sounds like you could have mixed it a little bit more. Some of the resin gelled. Not a real big deal just more sanding in spots.

Right oh... I mixed up another quart and definitely got better results...

Just a first timer freakin'

TCalYen

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Rock Candy in my resin!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.