500/1 wiring

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / 500/1 wiring (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

juliusjones12

Member - Posts: 2

Joined: March 15, 2006

Location: United States

Posted: October 31, 2006 at 10:33 PM / IP Logged

o.k guys:

the 12 w6v2 has alot of wiring flexibility.i want to wire 2 w6v2's in parrallel or series to a 500/1. because of the flexibility,my amp can see a two ohm load. how much power will each speaker see from this mono amp if i wire them in parrallel/series. can i extract 500 watts each speaker,or will they both see 250 watts? keep in mind that this is a mono amp?

killer sonata

Silver - Posts: 718

Joined: May 17, 2006

Posted: October 31, 2006 at 11:36 PM / IP Logged

how many voice coils are on the subs and what are their impedances?

bellsracer

Silver - Posts: 703

Joined: January 14, 2006

Location: United States

Posted: November 01, 2006 at 1:49 PM / IP Logged

If you have two of them, you will only be able to wire it up as a 1 ohm setup, 4 ohms, or 16 ohms (It's a dual 4 KS)

If your amp is a true 500/1, then each speaker will only see up to 250 watts each. What amp are you using? If it's not a CEA compliant amp, then you might not be running 500 watts from it. For example, there are many amps out there that state they are 500 watts or whatever but are actually much lower (like 150w@12 volts) If such is the case, your amp will not be able to even push two speakers and just barely be able to push 1 safely (for the speaker)

Good Luck!

Never send your ducks to eagle school.

The difference between ordinary and extraordinary is that little extra.

The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

sean 371

Member - Posts: 11

Joined: September 06, 2006

Posted: November 01, 2006 at 9:42 PM / IP Logged

I'm guessing he's talking about a jl 500/1, in which case, you're fine. those are great amps, although overpriced IMO

juliusjones12

Member - Posts: 2

Joined: March 15, 2006

Location: United States

Posted: November 02, 2006 at 4:29 PM / IP Logged

yes im talking about a jl audio 500/1. if i am running two dual voice coil 12w6v's at 2 ohm impedence, the amplifier will see a two ohm load from the setup. im thinking that the two speakers will then see 500 watts a piece wired in parallel. i say this because it is a mono amp.one output rated at 500 watts?

by the way,thanks for the replies

killer sonata

Silver - Posts: 718

Joined: May 17, 2006

Posted: November 02, 2006 at 6:56 PM / IP Logged

no, each sub will see 250. the amp will put out a total off 500RMS

wit2003

Member - Posts: 10

Joined: April 17, 2006

Location: United States

Posted: November 03, 2006 at 10:53 AM / IP Logged

yes the JL mono amps are wired in parallen internally so your 2 ohm speaker load becomes a 1 ohm load as far as the amp is concerned.

suicidecustom

Member - Posts: 25

Joined: October 30, 2005

Location: Canada

Posted: November 08, 2006 at 7:39 PM / IP Logged

the JL 500/1 features JL's RIPS technology. (regulated internal power supply). that means it's actual output is 500 watts rms at any load between 1.5 and 4 ohms and any input voltage between 11 and 14.5 volts. so in actuality it doesnt matter how you wire your speakers. you are going to be severly underpowering your subs though, as 'killer sonata' stated each speaker is seeing 250 watts of output and they are capable of 400 watts each. instead of blowing all that money on 2 12w6v2 drivers you should have bought 2 12w3v3 for that amp, would have been more worth your hard earned cash, or bought 2 amps.

integratyper934

Copper - Posts: 150

Joined: April 01, 2006

Location: United States

Posted: November 09, 2006 at 7:58 PM / IP Logged

i totally agree with suicide.

Search for other posts by integratyper934

jerry_m

Member - Posts: 3

Joined: December 06, 2006

Location: United States

Posted: December 14, 2006 at 11:47 PM / IP Logged

i have them same subs and you would have better sound out of one of the w6 in a ported box with that 500 on it than any way you think of with both

jerry_m

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.