body filler/ resin combo

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / body filler/ resin combo (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

swizzlesticz01

Member - Posts: 3

Joined: March 19, 2007

Posted: March 20, 2007 at 9:26 PM / IP Logged

i am new to glassing and i was wondering if you you could take bondo filler and mix it with bondo fiberglass resin? to make a paint on filler or if there is only a certian type you can do that with???

beginners luck

Search for other posts by swizzlesticz01

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 20, 2007 at 9:38 PM / IP Logged

Make the mixture a 5:1 ( Bondo : resin ) and if you want a thinner solution, then mix a 5:1.5 mixture. Just keep in mind that if your spreading it over a project with vertical walls, the mixture will run.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

swizzlesticz01

Member - Posts: 3

Joined: March 19, 2007

Posted: March 21, 2007 at 7:07 AM / IP Logged

thanx alot

beginners luck

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

body filler/ resin combo

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.