the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 lincoln ls, fiberglass ideas?


Post ReplyPost New Topic
< Prev Topic Next Topic >
cleanls 
Member - Posts: 4
Member spacespace
Joined: April 08, 2007
Location: United States
Posted: April 14, 2007 at 12:18 PM / IP Logged  

whats up,

im new to the forum. i have a 200 Lincoln LS and needed some ideas on fiberglass projects. so i was just wondering if anyone had any pics of LS's with custom systems. thanks

bellsracer 
Silver - Posts: 703
Silver spacespace
Joined: January 14, 2006
Location: United States
Posted: April 16, 2007 at 10:54 AM / IP Logged  
Try cardomain.com and look up what they have there. There are tons of possibilities and ideas to play with there. After that the only suggestion we could give you is, "Be Creative; Be Imaginative, and as we like to say, ADAPT, REFINE, and MODIFY!"
Ganbatte Ne!
Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.
danh0ward 
Member - Posts: 12
Member spacespace
Joined: September 03, 2004
Location: United States
Posted: April 23, 2007 at 12:48 PM / IP Logged  
I have a 02 ls and I've been thinking about about building a box ported through the rear deck. thats about as far as I got though. I have the wood but not the subs. I did a lot of other mods so the system may be my next project. we should keep each other updated on this. I'm on cardomain /id/danh0ward
my email is on there. laaaate
Dan Howard
isa-kuruption 
Member - Posts: 18
Member spacespace
Joined: April 04, 2007
Posted: April 23, 2007 at 7:53 PM / IP Logged  
I had an 02 and an 04 LS. I found the fact that the trunk hinges go into the trunk make is extremely difficult to do anything with it (note: I'm not a pro). In any case, I just had a box with a single 10" sub ported through the rear deck and next to it were my amps. This gave me just enough room to keep the spare in an easy to access manner.. not that I ever used the spare, but the idea was good.
In any case, good luck. I have seen a couple jobs done in LS's (sounddomain.com stuff)... which looked alright, but nothing reaaall fancy. If you figure something out, I'm definately interested.
Oh, and just an idea I had, you could do the trunk lid thing for the amp rack... and I complemplated putting a 10" sub into the passanger's side quarter panel, which seemed to be deep enough.. and back of the book calculations means I would have had 1.25cuft, but you can get subs that don't need such a large space, either.
danh0ward 
Member - Posts: 12
Member spacespace
Joined: September 03, 2004
Location: United States
Posted: April 23, 2007 at 11:37 PM / IP Logged  
isa, tell me more about the setup you had. was it band pass or just ported? if just ported, what way did you face the sub? and the big one, did it sound good? Thanks
Dan Howard
cleanls 
Member - Posts: 4
Member spacespace
Joined: April 08, 2007
Location: United States
Posted: April 24, 2007 at 8:25 PM / IP Logged  
thanks guys ill try all of your suggestions
lincoln2002lse 
Member - Posts: 31
Member spacespace
Joined: July 25, 2006
Location: United States
Posted: May 18, 2007 at 7:59 PM / IP Logged  

This http://www.cardomain.com/ride/822243/3 is a link to the system I am modeling mine after. (with more mods) Yes you are right there are some issues with getting the proper size box in the trunk area, hinges are only the begining of it, the curves, bolts and humps are tough to work around also. I am doing mine to hold 2 JL10w6-v2 and giving it lots of power.  Combination of fiberglass and 3/4 MDF. I am lucky to have a full blown wood shop and welding abilities at the house.   Getting anything in the kick panels is a challenge and the front driver side is pretty much a no go unless you are into doing a vehicle re-wire. I am getting there with my system but,,, it's a long surgery.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 17, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer