the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

need tips for my first fg project


Post ReplyPost New Topic
< Prev Topic Next Topic >
g6kid 
Member - Posts: 1
Member spacespace
Joined: July 12, 2007
Posted: July 12, 2007 at 11:23 PM / IP Logged  

Ok for my first fiberglass project i plan on making an enclosure for my 2 12 inch diamond audio d3's

I was most concerned with providing the correct amount of airspace for the subs...which i searched through the forum and found that packing peanuts are the easiest way to do so. Do you guys have any tips for accurately doing this...also if i put them in one single enclosure..which i have not decided if i am yet...should i make a partition out of MDF to create to seperate air spaces within the enclosure?

Also I know a ported enclosure allows your subs to respond better to lower frequencies. How do I determine the size shape and placement of these ports?

Any other general tips you guys can give me about fiberglassing would be greatly appreciated.

thanks in advance

bellsracer 
Silver - Posts: 703
Silver spacespace
Joined: January 14, 2006
Location: United States
Posted: July 15, 2007 at 12:45 AM / IP Logged  
g6kid wrote:
Ok for my first fiberglass project i plan on making an enclosure for my 2 12 inch diamond audio d3's

I was most concerned with providing the correct amount of airspace for the subs...which i searched through the forum and found that packing peanuts are the easiest way to do so. Do you guys have any tips for accurately doing this...also if i put them in one single enclosure..which i have not decided if i am yet...should i make a partition out of MDF to create to seperate air spaces within the enclosure?

Well the first place I would start is to make a cardboard box 12x12x12 on the inside. Put a line on the inside 6 inches from the bottom and pour the peanuts into that for measurements. The line represents 1/2 cf and of course a full box is 1cf. If you have the patience, I would recommend using as small a packing peanuts as possible, that will help maintain accuracy.
g6kid wrote:
Also I know a ported enclosure allows your subs to respond better to lower frequencies. How do I determine the size shape and placement of these ports?
Refer to the manual/information that came with the subs for the size of the ports, shapes for the most part, do not really matter so long as the proper vent area and length is maintained. As for placement, for the best quality in sound, I would make sure that the ports and subs are along the same plane as much as possible. That will help minimize phasing (assuming that the subs are mechanically in phase)
g6kid wrote:
Any other general tips you guys can give me about fiberglassing would be greatly appreciated.
Be patient, watch out for air bubbles. If you get any of them that manage to find their way in after curing, you'll have to get rid of them in order maintain strength. The final thickness should be no less than 3/8 inch for strength. Curves are the best form that FG takes and maintains, try and avoid flat zones; FG tends to be relatively weak in flat planes.

An oh yes, the most important thing about FG: HAVE FUN!

g6kid wrote:
thanks in advance

You are very welcome. Please do not hesitate to ask any other questions, the only dumb ones are the ones you don't ask.

Ganbatte ne!

Never send your ducks to eagle school.
The difference between ordinary and extraordinary is that little extra.
The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer