enclosure infinity 10.1

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / enclosure infinity 10.1 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

alphalanos

Member - Posts: 23

Joined: November 19, 2006

Posted: August 02, 2007 at 3:59 PM / IP Logged

Im trying to design a vented enclosure with winISD but im limited by space. Maximum space is 15x20x10 inches. I cant seem to get a useable port for this sub. Should I just make a sealed box instead? Its going in a hatchback so that should help a bit on low end. Thanks.

bellsracer

Silver - Posts: 703

Joined: January 14, 2006

Location: United States

Posted: August 03, 2007 at 11:23 PM / IP Logged

I would go for a sealed box... Assuming you are using the Kappa seris subwoofer (most common in my area so I am just assuming), if you were to make a box that is 15x20x10 with 3/4 MDF, you would not make the required airspace for a vented enclosure even without the sub, port and bracing displacements in place.

The sealed box only needs a minimum of 3/4 cubic feet, your box before displacements is 1 1/4 cf so you should not have an issue with airspace even after displacements.

Ganbatte ne!

Never send your ducks to eagle school.

The difference between ordinary and extraordinary is that little extra.

The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

alphalanos

Member - Posts: 23

Joined: November 19, 2006

Posted: August 04, 2007 at 8:34 AM / IP Logged

Ok thats what I figured. Thank you.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

enclosure infinity 10.1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.