ported box in a 92 silverado single cab

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / ported box in a 92 silverado single cab (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

evileagletalon

Copper - Posts: 65

Joined: November 17, 2006

Location: United States

Posted: November 02, 2007 at 1:50 PM / IP Logged

I have (3) 10" JL W3 v2 that I was thinking of putting in my truck. I want to do a ported box which means that I will have to try this with only (2) of them.

I no longer have a bench seat, I have 2 power bucket seats out of a 99 Yukon. I don't have a center console either, which means more room to work with.

Each woofer needs 1.125cu ft for a ported enclosure. The port needs to be 1.25" X 10.5" for the port opening, and 24.875" for the port length. By these specs, this box should be tuned to 33hz.

What would be the best way to build a box for (2) w3s ported in my truck?

I want to be heard from far away also.

These (2) subwoofers will be powered by my Zapco Reference 750.2

Back to Top

Search for other posts by evileagletalon

ibasspro

Copper - Posts: 95

Joined: October 10, 2007

Location: California, United States

Posted: November 02, 2007 at 8:15 PM / IP Logged

Post the T/S parameters for the subs, & make so accuate measurements of the area you have to work with (WxHxDtop&Dbottom), & I will poke em into TP & see if we can make all 3 work for ya. Also. A 750 is to much to the 2 JL's unles you really gain it down. I just looked, & I only have the 12" vrsion of yer subs, so make shure to give all the specs JL lists in te owners manual, in mm if you can.

used to be loud, used to be fast...now I am married LOL

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ported box in a 92 silverado single cab

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.