Parrot CK3100

Home / the12volt's Install Bay / Cellular and Communications / Parrot CK3100 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

h2oskierfl

Copper - Posts: 87

Joined: April 20, 2005

Location: United States

Posted: January 02, 2006 at 12:04 PM / IP Logged

First time working this the setup. I am wondering if it is necessary to use the mute wire and aux input. From the looks of the diagram the device just interrupts the speaker output. I am wondering if this is correct? If so, does this also mean that the parrot device has its own amp for the output to the speakers for calls?

Customautomotiv

Copper - Posts: 128

Joined: March 22, 2005

Location: United States

Posted: January 17, 2006 at 11:15 PM / IP Logged

you are correct on the mute wire. Do not use the thin speaker output wires. They are preamp wires only. You need to cut 2 wires on the female black plug for sound.

Search for other posts by Customautomotiv

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You can vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Parrot CK3100

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.