led swap in amp

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / led swap in amp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bman365

Member - Posts: 9

Joined: October 26, 2007

Location: North Carolina, United States

Posted: January 18, 2008 at 10:40 AM / IP Logged

Would I have to test the led first to see what resistance it has, so that i get the same size..or would it matter what size i get. Doing this to my kicker kx1200.1

Also Im wanting to wire some LEDs in my subwoofer box to shine through the plexiglass. Would I run the power of it through the remote wire so it turns on/off with everything.

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 18, 2008 at 9:18 PM / IP Logged

it depends what colour the LED is. from there you must grb the proper resistance, but if you are only replacing the LED, grab one that is the same size and colour. as for LED in your box, you will want to run the power to a relay. the relay will be triggered by the remote wire.

relay setup

85 - ground

86 - remote turn on lead trigger

87 - constant 12v (+) fused @ 5 amps

30 - to postive wire of led set.

it will depend how many LEDS you use and how you wire them. once you determine the proper setup you are using, you can grab the proper resistor.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

led swap in amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.