led light bar

ok, here you go. the only problem i can see with it is if you use the wires in the trailer plug, the led's are going to flash opposite the turn signal light. for instance, when the right turn signal flashes on, the led's on that side flash off, then when the turn signal light flashes off, the leds on that side flash on. look at the diagram and youll see why.

if you dont want it that way, it can be changed to go the other way but takes a little more wiring. you can do it like the following, which i think is better anyway. you have to run a wire from the left and right side 12v out at the turn signal switch before it goes into the flasher to terminal 85 on the relay. terminal 87 will go to its respective turn wire off the trailer plug. see below.