need to add switch to quad bixenon setup
Home /
the12volt's Install Bay /
Lights, Neon, LEDs, HIDs / need to add switch to quad bixenon setup (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: September 13, 2010 at 4:34 PM / IP Logged
hi, total newbie ignoramous when it comes to electrical. however I CAN follow direction well LOL
I did a retrofit in my Jeep and I have QUAD bi Xenon Headlights. So 4 lo and 4 high. of course Im getting hasseled and i need to be able to turn off one set of the lights. I have a crude wiring drawing.
I THINK I need to be able to turn the relay on the left side on/off thru a seperate switch. So do I have to add another relay on the power of the trigger to that relay??? Or how do I do this?
I really appreciate any help.
Rob
Posted: September 13, 2010 at 4:52 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Tuesday, May 7, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Tuesday, May 7, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
