12v water pump for a camp

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / 12v water pump for a camp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Yamayer

Member - Posts: 2

Joined: January 12, 2003

Location: Canada

Posted: April 30, 2013 at 10:23 PM / IP Logged

Hi there, my problem is that i use a 12v water pump with a bosch water heater for shower anb sink but not in the same are of the camp and my water pump is not working on demand os i make my electrical connection on three way switch with 2/14 electrical wire like in a house. But on the three way i am loosing power on the pump i know long wire can cause loosing sone power but is there acway to loosing less csuse there a big difference if i connect the pump directly on my car battery or if you know a better tips can solve my problem

Thanks

Back to Top

oldspark

Gold - Posts: 4,913

Joined: November 03, 2008

Location: Australia

Posted: May 01, 2013 at 2:35 AM / IP Logged

Yes - thicker gauge wire.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

12v water pump for a camp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.