2015 Jeep Wrangler TIPM LED problem

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / 2015 Jeep Wrangler TIPM LED problem

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jsigna

Copper - Posts: 151

Joined: July 25, 2014

Posted: October 17, 2017 at 6:21 PM / IP Logged

Hey all,

Experiencing a really annoying issue.

Installed LED Headlight bulbs H13 into a 2015 Jeep Wrangler.

Noticed a slight flicker and also get intermittent periods where we get TIPM warnings which say, "no buS" and the low beams refuse to shut off. Not to mention the windshield wipers go back and forth. Decided to try Anti-Flicker LED Resistors (the gold ones) plug and play. No dice. The flicker remained and intermittent TIPM issues.

So I wired relays for both low beams individually utilizing the led resistors on the source feed side of the relay. Flicker is gone (yay!), still getting intermittent TIPM bug outs.

I was thinking of switching the load resistors to 4700uf capacitors but I wanted to reach out to you guys to see what any of you might think.

I am actually losing my mind on this, so any help would be awesome.

Thanks!

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.