Flashing Head Lights

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Flashing Head Lights (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Jaice

Member - Posts: 21

Joined: August 14, 2004

Posted: June 30, 2005 at 12:34 AM / IP Logged

What I'm trying to acomplish is making my headlights flash in an alternate pattern. I'd like to run it off a switch since its not for on-road use. Could I do this with 2 relays and a flasher, or would more be required?

Back to Top

ff-mike

Copper - Posts: 199

Joined: November 15, 2004

Location: United States

Posted: June 30, 2005 at 9:40 AM / IP Logged

All you really need is the correct flasher and 2 SPDT relays. A Tridon EL13A or a #537 will do the alternation part. They are also available from many poublic safety stores or eBay

You will need to cut the headlight wire in 2 places- once from the harness and then again between the 2 lamps Connect the one from the harness to the ckt below and then connect the outputs to the wires between the lamps

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Flashing Head Lights

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.