ultrastart 4255 leds

 I,m curious if anyone knows how to add a separate led to this alarm. it comes with two red leds in the antenna, is there any way that i can tap into that led power to add one in the dash? or is there another way all together? thanks for the help!jmacf14

If you find the Neg of that alarm (Check manual) (Alot of good alarms have a NEG hood ( even trunk switches) switch. You could run a small wire through firewall) you can get another LED and wire a positive to a powersource ( make sure LED is 12 V rated or add a resistor ) and run the NEG to the alarm NEG. Read your manual and if your not sure about alarm NEGS just post in the car security section here. (make sure you include good info like alarm make and your type of vehicle you plan on wiring it into.)40 grit has saved my life sometimes =[