the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

combine 7-color LED kits?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Jasonb61 
Copper - Posts: 81
Copper spacespace
Joined: December 01, 2004
Location: United States
Posted: March 26, 2006 at 9:39 PM / IP Logged  
Hello,
I am wanting to install the 7-color LED washer's on the hood along with the 7-color LED underglow and they don't have a kit (that i know of) that combines the two and I want both of them to change at the same time so I dont have to operate and change two different units... Is there a way I can splice in the 7-color washer LED's into the underglow kit?
Thanks,
-Jason
siresmerph 
Member - Posts: 15
Member spacespace
Joined: March 26, 2006
Location: United States
Posted: March 29, 2006 at 12:02 AM / IP Logged  
not to sure on this one bro. but i think that if you were to splice into the positive and negative coming from the washer lights into the wires coming OUT of the dis box ( neon box ) it should work. AGAIN!!! not too sure on that one.
Jasonb61 
Copper - Posts: 81
Copper spacespace
Joined: December 01, 2004
Location: United States
Posted: March 29, 2006 at 7:05 AM / IP Logged  
Alright I'll check that out... i'll pick up a kit in a week or so and take a look.. thanks! Anyone else have any other ideas?
compudude86 
Member - Posts: 36
Member spacespace
Joined: March 29, 2006
Location: United States
Posted: March 29, 2006 at 2:32 PM / IP Logged  
if they are from the same manufacturer, they should work, if its random color change, and they reset every time the circuit is powered off and on, then yes it should work no problem.
compudude86 
Member - Posts: 36
Member spacespace
Joined: March 29, 2006
Location: United States
Posted: March 29, 2006 at 2:44 PM / IP Logged  
cant edit i guess, but anyways if they require a controller with a wire for each color you might be doing some jury-rigging
Jasonb61 
Copper - Posts: 81
Copper spacespace
Joined: December 01, 2004
Location: United States
Posted: March 29, 2006 at 4:56 PM / IP Logged  
from what I understand, its not random but it does have a control box... on the control box you press a button and it cycles through the colors... im sure i can figure something out!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer