LED turn signals on Motorcycle

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / LED turn signals on Motorcycle (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hurley1718

Member - Posts: 4

Joined: April 27, 2006

Location: United States

Posted: May 04, 2006 at 1:08 PM / IP Logged

I know this isn't a car, but its still a 12v system so I thought I would ask anyway. I installed new rear turn signals on my honda CBR and they are LED's. Now both front and rear blink 2x as fast. Can I install a resistor and if so what size to help slow it down?

Thanks.

doibuy

Copper - Posts: 177

Joined: March 15, 2006

Posted: May 04, 2006 at 3:02 PM / IP Logged

measure the resistance of your old tail light assembly with a multimeter, then measure the resistance of the new tail lights. Find the difference and try a resistor of that value.

hurley1718

Member - Posts: 4

Joined: April 27, 2006

Location: United States

Posted: May 04, 2006 at 3:20 PM / IP Logged

I will try that, thanks.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LED turn signals on Motorcycle

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.