12 Neon Black Tubes run to HU power?

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / 12 Neon Black Tubes run to HU power? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tdbdadrummer

Member - Posts: 1

Joined: July 26, 2006

Location: United States

Posted: July 26, 2006 at 2:55 AM / IP Logged

Can I run my 12" Optix neon tubes to the power/ground on my HU?

They say in the instructions, ANY 12V power source, so if I just hook the power to power and the ground to ground, there shouldn't be a problem right?

Thanks.

Back to Top

nunogtp

Member - Posts: 10

Joined: January 27, 2004

Location: United States

Posted: July 30, 2006 at 3:48 PM / IP Logged

there shouldn't be because they draw very low current but its not the reccomended place to get power for neons because it could cause noise to start coming from your speakers. if you don't have any problems leave it, but if any problems arise go to the ignition switch or to the fuse box

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

12 Neon Black Tubes run to HU power?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.