the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

04 bmw 530i, radio removal


Post ReplyPost New Topic
< Prev Topic Next Topic >
jr2418 
Member - Posts: 3
Member spacespace
Joined: December 25, 2006
Location: Texas, United States
Posted: December 17, 2007 at 8:01 PM / IP Logged  
How do u remove the factory radio on a 04 bmw 530i?
J Jr
dwarren 
Platinum - Nominee - Posts: 1,811
Platinum - Nominee spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 03, 2004
Location: California, United States
Posted: December 17, 2007 at 11:05 PM / IP Logged  

With a plastic panel tool, start from the passegner side and gently pry the large trim piece, there are about 4-5 large pressure fit pins on the trim. Then remove the last piece over the radio, two pins on this piece.

There should only be two philips screws holding the radio in.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer