sub two 10

Home / the12volt's Install Bay / Car Audio / sub two 10 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

frankyrealtor

Member - Posts: 2

Joined: December 26, 2007

Location: Texas, United States

Posted: December 26, 2007 at 3:46 PM / IP Logged

Hi, i have a kicker 5 channel amp, it is going in a 2004 Silverado four door HD two subs behind seat 10 " here is the stats on amp.

I was wondering what type of subs would i need to make it pound...... Any information helpful.

Thanks alot guys sorry for the long post.

Here is the stats on the box i have

SUB BOX

sub two 10 -- posted image.

Life time Guaranty

Front Firing Systems

Material 5/8'' M.D.F

Air Volume .88 Cubic Feet Per Sides

Mounting Depth 5.5''

AMP

5-Channel KX-Series Power Amplifier

Low Impedance Operation

Class D Amplification in Subwoofer Channel

SORT Protection Circuitry (Short circuit, Over-voltage, Reverse polarity, Thermal)

SAMS (Stereo And Mono Simultaneously)

MOSFET Power Supply

KickBass: 0-18 dB @ 40 Hz

Built-In Variable Crossover: 12 dB High or Low-Pass operation (50-200 Hz)

High & Low level inputs

Custom tooled gold plated connectors

Remote Bass Level Control with 20' cord

Cast aluminum EndKaps

RMS Power Ratings:

14.4V:
- 70 watts x 4 chan. @ 4 ohms
- 85 watts x 4 chan. @ 2 ohms
- 165 watts x 2 chan. @ 4 ohms
- Sub Power:
- 210 watts x 1 chan. @ 4 ohms
- 420 watts x 1 chan. @ 2 ohms
12.5V:
- 40 watts x 4 chan. @ 4 ohms
- 70 watts x 4 chan. @ 2 ohms
- 140 watts x 2 chan. @ 4 ohms
- Sub Power:
- 180 watts x 1 chan. @ 4 ohms
- 360 watts x 1 chan. @ 2 ohms

Input gain control: Low Level (170mV - 5V), High Level (340mV - 10V)

frank

Back to Top

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: December 26, 2007 at 7:25 PM / IP Logged

Find any two 10" svc 4 ohm subs rated from 200 - 400w rms that will work in a smaller sealed box and also are not too deep. Pioneer Premiere might work for you.

Top Secret, I can tell you but then my wife will kill me.

Back to Top

frankyrealtor

Member - Posts: 2

Joined: December 26, 2007

Location: Texas, United States

Posted: December 26, 2007 at 7:30 PM / IP Logged

how would you wire them How about the JL audios are they any good.

Thanks

frank

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

sub two 10

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.