the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 gmc speaker distortion


Post ReplyPost New Topic
< Prev Topic Next Topic >
mazz_z71 
Member - Posts: 1
Member spacespace
Joined: June 20, 2007
Posted: January 05, 2008 at 3:19 PM / IP Logged  

I had an amp installed and all the speakers replaced in my truck. There's a faint distortion in the right front door speaker, since installation. The faint distortion is more noticeable during conversational programs. It does not matter if I'm listening to AM, FM, XM, or even a CD. It also does not occur all the time. But does not seem to be temperature, time of day, or weather related, but more related to frequency. I can minimize the distortion by turning both treble and bass down. My wife cannot hear it, but I can. The installer has replaced the speaker, replaced the crossover, replaced the amp, rewired the speaker, and set the gain on the amp several times. I'm wondering if the factory head unit is the issue, given the unit is tuned toward the cheap factory speakers. However, the installer switched leads at the amp from left to right, and the problem remained at the right front door speaker. There are units on the market to "clean" the factory head unit signal, but at their given costs, a new head unit may make better sense. Specs are below. The installer has an excellent reputation, and has bent over backwards to resolve the issue. I'm not concerned about him, since he shares my concern over this issue. It is rather perplexing. Any ideas or things to check would be most appreciated.

Vehicle: 2007 GMC Sierra Extended Cab (New Body Style)

Factory System: Non-Bose AM/FM/CD/XM Head Unit, 6-1/2" factory speakers in front doors, 4x6 factory speakers in rear doors, 1" factory tweeters in A-Pillars.

Modifications Made: Added Memphis MClass MCA2004 Amplifier, Memphis MClass CoAxial 6-1/2" Speakers 15-MC6 in all four doors, Memphis MClass15-PR1 1" Tweeters in A-Pillars. Factory head unit with XM remains.

Memphis MCA2004 Amp Specs - RMS Power 4 Ohm Stereo (14.4V) 50x4 / Input Sensitivity 250mV-9V / Frequency Response +/- 1dB 10Hz-50kHz (Amp feeds are via LOCs located behind the factory head unit.)

Memphis 15-MC6 Speaker Specs - RMS/Peak (W) 50/100 / Sensitivity (dB) 93 / Carbon Fiber Cone / Magnet Size (0z) 10 / Mounting Depth (in) 2.25

Memphis 15-PR1 Tweeter Specs - RMS/Peak (W) 50/100 / Sensitivity (dB) 87 / Mylar Cone / Magnet Size (0z) 0.75 / Mounting Depth (in) 0.75

forbidden 
Platinum - Posts: 5,352
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: January 05, 2008 at 5:25 PM / IP Logged  

Sit in the passenger seat and see if the sound magically switches to the driver side of the truck.

Top Secret, I can tell you but then my wife will kill me.
speakermakers 
Copper - Posts: 231
Copper spacespace
Joined: January 02, 2003
Location: United States
Posted: January 05, 2008 at 6:05 PM / IP Logged  
The Mclass2004 had a problem with distorted output. I have been told that the problem has been rectified on the current amplifiers but several batches of these amplifiers where shipped with this problem and are still on the shelves of retailers. I am a huge fan of Memphis products and I have sold hundreds of their Mcalss amplifiers. They can’t be beat in their own price range. But I have to say that I personally stay away from that particular model. I didn’t like being burned. Bring this to your retailers attention and insist that they call Memphis and talk to a tech that is familiar with the problems they have had with that model of amplifier. I think you will fond that they will repair your amp promptly. As I said this was a batch problem and it makes total sense that even after replacing the amp with another one in their inventory that the problem was still there

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer