pioneer keh m8200 wiring

Home / the12volt's Install Bay / Car Audio / pioneer keh m8200 wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

peter_x

Member - Posts: 6

Joined: March 17, 2008

Posted: April 09, 2008 at 6:03 PM / IP Logged

Hi.

I have wired a couple head units before, but I haven't seen anything like this:

pioneer keh m8200 wiring -- posted image.

Only 10 pins on the harness, and an additional circular harness. What do I do?

Thanks.

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 09, 2008 at 6:31 PM / IP Logged

That's one of the old cassette decks with CD changer control right? I haven't seen one of those in at least 10 years. Someone wants it installed?

Support the12volt.com

Back to Top

peter_x

Member - Posts: 6

Joined: March 17, 2008

Posted: April 09, 2008 at 6:56 PM / IP Logged

I'm not a pro, this is for myself. If it's too much of a hassle to wire it I'll get something else.

Back to Top

forbidden

Platinum - Posts: 5,352

Joined: November 01, 2003

Location: Alberta, Canada

Posted: April 09, 2008 at 7:20 PM / IP Logged

The 10 pin harness is the main harness for all power and speakers. The speaker lines shared negative terminals by the side. So the front left speaker and the rear left speaker used the same wire for the negative, this takes up 6 of your spots. The last 4 will be +12v, IGN, GND and REM. If I find a old molex, I will list the proper pinout for you.

Top Secret, I can tell you but then my wife will kill me.

Back to Top

peter_x

Member - Posts: 6

Joined: March 17, 2008

Posted: April 09, 2008 at 7:31 PM / IP Logged

Ok, thanks.

Would it help if you had the colors on the harness (which I didn't include in the pic)?

They are from right to left:

Grey/Red

grey

grey/black

GREEN/ red

green

GREEN/ black

orange

black

red

blue

Thanks.

Back to Top

forbidden

Platinum - Posts: 5,352

Joined: November 01, 2003

Location: Alberta, Canada

Posted: April 09, 2008 at 7:34 PM / IP Logged

They are from right to left:

RR+ Grey/Red

RF+ grey

R- grey/black

LR+ GREEN/ red

LF+ green

L- GREEN/ black

+12V orange

GND black

IGN red

REM blue

Going by memory here (us older guys sometimes that is a bad thing) but I may have the front and rear speakers reversed. Easy to figure out with the fader control.

Top Secret, I can tell you but then my wife will kill me.

Back to Top

peter_x

Member - Posts: 6

Joined: March 17, 2008

Posted: April 09, 2008 at 7:38 PM / IP Logged

Thank you very much for that!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pioneer keh m8200 wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.