dei 560t in 06 civic

Home / the12volt's Install Bay / Car Audio / dei 560t in 06 civic (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rr5656

Member - Posts: 6

Joined: October 25, 2007

Location: Illinois, United States

Posted: April 11, 2008 at 1:24 AM / IP Logged

i installed the 560t RS in a 2006 civic however when i turn on the RS the oem alarm goes off im guessing its because i didnt connect the green and blk wire to disarm the oem alarm. the factory alarm wire is brown(+) so does this wire need to see a negative or positive pulse to disarm??

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: April 11, 2008 at 11:20 PM / IP Logged

The brown disarm requires a negative pulst to disarm the factory security.

Is this 560t RS one of those units that uses the factory remote to activate? Here is the problem with using factory transmitters.

You MUST use the factory arm and disarm wires. If it doesn't use the factory remote, I can't understand why it would arm.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei 560t in 06 civic

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.