console box

Home / the12volt's Install Bay / Car Audio / console box (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bb 12 man

Member - Posts: 10

Joined: April 10, 2008

Location: Tennessee, United States

Posted: April 10, 2008 at 10:42 PM / IP Logged

I have a Planet Audio BB12D sub.I want to build a ported box firing toward the back a standard cab truck. Does the port have to face the back of the cab also? How far away from the back wall should the port and sub be? Please help me and my dad with this problem.

How far up your ass does your head go??? Clay Cole

kondziolka

Member - Posts: 20

Joined: April 20, 2008

Location: Colorado, United States

Posted: April 20, 2008 at 5:21 PM / IP Logged

It has been my experience that if possible you try to keep your port on the same suface as the sub to get the best results. You can bing it out of the side of the box as well but not the back. As far as the backwall goes your best bet is to try to keep the sub at leased 2 inches off the wall. If you can put an angle on the baffle (where the sub mounts) so that it does not play flat against the wall that would be best. Hope this helps.

Where ever there is a problem there is opportunity.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

console box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.