blew tweeter

Home / the12volt's Install Bay / Car Audio / blew tweeter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

leoleo

Member - Posts: 18

Joined: January 29, 2008

Posted: May 02, 2008 at 11:40 PM / IP Logged

i was hooking up component speakers(not coaxial) to 2 ch amp and i blew tweeters..

all i m hearing is mid range..none from tweeter..

my setting was at around 125hz..is this the reason to blew it??

or gain setting was..??

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 03, 2008 at 1:27 AM / IP Logged

The little crossover boxes that came with the speakers, did you use them?

Back to Top

leoleo

Member - Posts: 18

Joined: January 29, 2008

Posted: May 03, 2008 at 1:39 AM / IP Logged

yep

Back to Top

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 03, 2008 at 1:43 AM / IP Logged

What kind of separates are they?

Back to Top

leoleo

Member - Posts: 18

Joined: January 29, 2008

Posted: May 03, 2008 at 3:33 PM / IP Logged

oh nevermind..

it was crappy deck wasn't giving enough juice, and the gain setting on amp was too high..

as soon as i turn it down, tweeter came back on..

deck was defective from the first place anyway..

tweeters were going into protection..yeah the tweeter got protection circuit built in according to specs..

i am gonna get new headunit..

i am gonna grab new headunit..

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

blew tweeter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.