vibration and dome/map light

Home / the12volt's Install Bay / Car Audio / vibration and dome/map light (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: July 06, 2008 at 2:07 AM / IP Logged

I'm having a little problem wit my bass and my map dome light. When I has the bass halfway up or higher my map/dome light vibrates . I tried tighting the screw that holds it down it worked for a little bit then it started again any suggestions. I have a 1986 cadillac deville 4.1l I'm pushing 2 alpine type r 122d on a audiobahn a2200hct amp

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: July 06, 2008 at 10:30 AM / IP Logged

Remove the assembly, squirt a little expandable foam insulation into the area between the headliner and the roof where it mounts, put it back in while the foam is still wet.

Support the12volt.com

still_walkin

Silver - Posts: 644

Joined: April 18, 2007

Location: California, United States

Posted: July 06, 2008 at 3:10 PM / IP Logged

Ok ill try that I played with it a little while the bass was up and noticd it has a 1.5 bracket by 3 that slides in then it mounts on the other end wit a screw you think if I put some second skin sound deadner around it it might work .

1993 sdv

Alpine 4x6 6x9 5 1/4 swr-10d4

alpine v60

12.5 VGA flip down

Nettop pc w/10" touch screen

78nova

5-re audio 5x7 ,10" sub &

Xtx-500.5

"Take the faceplate off get the jumperpack"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

vibration and dome/map light

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.