orion 225hcca v1 bridging module

Home / the12volt's Install Bay / Car Audio / orion 225hcca v1 bridging module (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rockyfarted

Member - Posts: 33

Joined: March 19, 2006

Location: Canada

Posted: July 31, 2008 at 1:46 AM / IP Logged

Ok anyone on here have any experience in making there own bridging module for a first gen orion 225hcca amp with the din input on the one end the one where you need the 400bdg module. I can't find it anywhere and would like to make my own if possible. Can anyone on here help me out with this?

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 31, 2008 at 7:07 AM / IP Logged

If your radio does not have RCA jacks, you can simply wire one channel of your Line out converter out of phase. Wire the right channel out of phase and then the yellow wire will be right negative. Bridges just like the bdg 400. Orange positive, yellow negative.

Back to Top

rockyfarted

Member - Posts: 33

Joined: March 19, 2006

Location: Canada

Posted: July 31, 2008 at 12:13 PM / IP Logged

No my radio does have rca's and it's just the amp that I would like to bridge to mono operation to run subs off it. I have read that it ends up being the orange + and yellow + wires but how is this done to make it work?

Back to Top

i am an idiot

Platinum - Posts: 13,667

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 01, 2008 at 5:07 AM / IP Logged

They use op-amps to invert the right channel. The following page gives a few details about how it is done. The section on op amp inverters should be the most helpful.

Op Amps

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

orion 225hcca v1 bridging module

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.