new system

Home / the12volt's Install Bay / Car Audio / new system (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jarvy

Member - Posts: 9

Joined: September 17, 2004

Location: Canada

Posted: December 26, 2008 at 12:31 AM / IP Logged

hey guys i came across some free stuff. KICKER cvr12 sub and a VALOR VPA404 1000-watt 4-channel amp. im not too great on wiring up dvc subs so i dont know if i can run these together.

[img]http://www.savinglots.com/pimages/vpa-404.jpg[/img]

[img]http://carjamz.com/zen/images/05CVR12-4.jpg[/img]

will these be compatable together?

amps stats:

-class a/b mosfet circuitry

-low and high level inputs, frequency adjust range: 20hz-40khz

-4 x 100w rms at 4-ohm, 4 x 150w rms at 2-ohm, 2 x 500w max at 4-ohm

sub stats:

-Dual 4-ohm dual voice coil

-RMS Power 400 watts

-Peak power 800 watts

-Frequency response 25-500 Hz

also i have a stock head unit but i want to run a line out converter so i can get a signal for the amp, any suggestions on which wires to splice into? 2000 ford ranger.

jarvy

Back to Top

ragsports

Copper - Posts: 192

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 17, 2008

Location: Michigan, United States

Posted: December 26, 2008 at 8:22 PM / IP Logged

This will work if wired properly. You are goin to have to bridge channels 1 and 2, and then bridge channels 3 and 4. Since you have dual 4 ohm voice coils you are goin to have to wire them in series to produce a 8 ohm load on each channel. As for the LOC usually people tap into the back 2 drivers you can spilce behind the radio, or anywhere you have access to the wires. (Behind the radio is usually the easiest place to connect a LOC.)

Option 2 (series) = 8 ohm load

Voice coils wired in series

Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

new system

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.