wiring a 6 channel amp

DO NOT use resistors in your speaker wiring. This does absolutely nothing as the extra wattage you are going to get will be sucked up by the resistor anyways and not go to the speakers.(Just learned this myself when talking to a fellow enthusiast as I have actually done this 2x 4ohm subs and 1x 2ohm resistor to run the amp at 1ohm) You will need to provide a lot more info about what you are doing before anyone can help. Here are the questions that need to be answered.

1) Factory head unit? If not, brand and model #

2) Factory speakers? If not, brand and model #, installed in factory locations?

3) Model # of amp

4) Do you already own this amp?

5) Do you ever plan to add subs?

6) Will you ever expand system to add more amps, speakers, EQ, etc?

Once you provide these answers it will be a piece of cake to help you out. If it is the G6600 model JL amp you will NEVER hear the difference between 4 and 2ohms as it is only 20watts less at 4ohms than at 2. Will be waiting to hear the answers.

TTYS

Nick