alpine 505 , pxa h701 hu outputs are dead

Home / the12volt's Install Bay / Car Audio / alpine 505 , pxa h701 hu outputs are dead (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

camarob4c1

Member - Posts: 28

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 27, 2004

Location: United States

Posted: February 26, 2009 at 4:27 PM / IP Logged

I have an Alpine IVA-W505 and a PXA-H701. I want to run rear deck coaxials off the hu's speaker outputs. But when testing, there is only very faint sound coming out. Does anyone know how to "turn on" the 505's speaker outputs when using the 701 too?

Thanks, Tom

camarob4c1

Member - Posts: 28

Joined: September 27, 2004

Location: United States

Posted: February 28, 2009 at 4:22 PM / IP Logged

Never mind. Found out that when using the 505 and 701 the speaker outputs are turned off and there is no way to turn them on,. I added another amp and ran the rerar coaxials off it through the 701.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alpine 505 , pxa h701 hu outputs are dead

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.