recommended amp and enclosure?

I bought three ten inch audiobahn aw1008t. i would like to know what amp would be the best fit to get the most out of my subs. what amp would make my subs sound the best (volume and sound quality), any suggestions would be greatly appreciated.2002 Lincoln ls3 aw1008tkicker zx2500.1Jason Grignon

what type of voicecoils are on the subwoofers? what is the rms of each subwoofer?

1000RMS huh? well i think not. Audiobahn went out of business last year. enough said.

well regardless could you recommend an enclosure that i could get the most out of these subs please? i'm sure you're not a fan but i didn't know i needed to have everyones favorite brands to get advice. if you dont want to help...well thanks for nothing than.Jason Grignon

dual 2 ohm, 1000 rms 2000 peakJason Grignon

Look into the JBL GTO24001,  Great build quiality, good power as well.  Also the optimal enclosure for any speaker will be one you make, and design yourself.  It needs to be the correct cubic footage per subwoofer, and have to correct port size to get the best sound out of your woofers.  As for what type of box to go with, i would go with a ported box as they do not recommend a sealed one as you stated.

i cant build a box with confidence, do you know any good websites that would make a box for my subs (taking in consideration all the speaker specs)?Jason Grignon

The best thing to do would to have one of your local car audio shops build you one. Look and shop around for good prices they will be able to help you out.

could someone check out the rockford fosgate t25001-bd, it is stable at 1 ohm. i was told a 2 ohm am would not be good for my 3-10" aw1008t because it will be wired for 1.33 ohms and may do damage to amp (cut out all the time) im not experienced enough to know if the rockford amp will work well or not. its 2500x1 at 1 ohm. any help would be great.Jason Grignon

i would go with the jbl and wire your speakers for a 3 ohm load