the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

how much power can i give my w1's


Post ReplyPost New Topic
< Prev Topic Next Topic >
whitemike0110 
Copper - Posts: 84
Copper spacespace
Joined: March 23, 2009
Location: Florida, United States
Posted: April 27, 2009 at 7:53 PM / IP Logged  
I have two JL audio w1v2's and i'm wondering how much power I can give these things. My amp wired at 2 ohms is 1500watts rms, but at 8 it like 2 or 300 per channel. Its a MTX thunder 1000/2.
Also do these subs like space, i have a smaller sealed box their in right now, i believe came from AMS, but i have a bigger box that i kind of want to put them in. Thanks for your help
Mike
Hello.
wadewills 
Member - Posts: 32
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 10, 2009
Location: Alabama, United States
Posted: April 27, 2009 at 10:38 PM / IP Logged  
The W1 12's are only 300rms a piece.  So the amp should only be less than half way up if your numbers are correct. I never heard of a 1000w amp making 1500rms. The bigger box will probably give you more boom, but the quality might decrease.  Do you know the cubic foot of the box? That will help you determine the sound that will come out.
Enjoy Life theres plenty of time to be dead
ragsports 
Copper - Posts: 192
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 17, 2008
Location: Michigan, United States
Posted: April 28, 2009 at 8:36 AM / IP Logged  

wadewills wrote:
The W1 12's are only 300rms a piece.  So the amp should only be less than half way up if your numbers are correct. I never heard of a 1000w amp making 1500rms. The bigger box will probably give you more boom, but the quality might decrease.  Do you know the cubic foot of the box? That will help you determine the sound that will come out.
   

This is Wrong!  The gain is set depending on the output voltage of you source unit  (headunit).   The gain could be all the way up, or all the way down depending on what source you have.  It is not a volume control and should not be used in this way!  Read the sticky on how to set your gains.  As for frying thoes speakers, it is possible, use your ears, and dont overdrive them and you will be fine.

haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: April 28, 2009 at 10:38 AM / IP Logged  
Good call, ragsports.
The "gain control" as so many people incorrectly refer to it, is NOT a gain at all. It is a level matching stage - it is there to adjust the input signal to provide optimal output signal, (and signal-to-noise) either into the load provided or to make certain the output stage is not driven into clipping. The "gain" of an amplifier is fixed by the internal circuitry, and doesn't change.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer