amps

Home / the12volt's Install Bay / Car Audio / amps (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

twoxtrm

Member - Posts: 1

Joined: June 11, 2009

Location: Minnesota, United States

Posted: June 11, 2009 at 11:15 PM / IP Logged

I apologize if this has been brought up before, but here is my issue.

I recently pulled out 2 old amps both 200x2 rockford amps (old school) We hooked them up to a test bench and both amps powered up fine.

1. Amp powers up, switch to amp from deck power on test board and we get no sound. Most other amps work ok.

2. Amp power up, switch to amp from deck power and test board shuts off, flip switch everything comes back on.

Any idea what may be happening here. We kinda think amps might be pulling to much power from source, but I am desperate for advice.

i am an idiot

Platinum - Posts: 13,671

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 12, 2009 at 6:03 AM / IP Logged

Try connecting a stand alone known good speaker to the amp. Just use the test bench for powering and providing signal to the amp.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amps

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.