setting ss and lp filters

Home / the12volt's Install Bay / Car Audio / setting ss and lp filters (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jharijan

Member - Posts: 2

Joined: July 06, 2009

Location: Florida, United States

Posted: July 06, 2009 at 12:33 AM / IP Logged

I was wondering how to accurately set my subsonic and low pass filters. I know that the ss is supposed to be like 5-10 below the frequency of my box but not so sure about the lp. The knobs for both of these are numbered only for high and low but no where in between so I'm not sure how to set it to the exact number. this is what I mean...

http://www.mtx.com/caraudio/products/manualsQuickInstall/amps/XT_600XD_300XD_InstallSheet.pdf

jharijan

Member - Posts: 2

Joined: July 06, 2009

Location: Florida, United States

Posted: July 06, 2009 at 1:28 AM / IP Logged

I'm pretty new to this so and trying to tune my amp so any input would be appreciated, thanks.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

setting ss and lp filters

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.