03 expedition, amp

Home / the12volt's Install Bay / Car Audio / 03 expedition, amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

flytyme69

Member - Posts: 1

Joined: July 23, 2009

Location: Virginia, United States

Posted: July 23, 2009 at 8:54 PM / IP Logged

I have a 03 Expo EB with the 6 disk radio and rear subwoofer. I have installed my amp and sub from my old car into it, ran all power, ground, spliced RCA into the sub amp, but I can't get the remote wire to work right....when I test it it reads 7v on my multimeter when the radio it on, but I can't figure out a way to step that up to 12v to turn on the amp. How have other people installed and amp to the factory radio and got the remote turn on?

yimke

Copper - Posts: 417

Joined: June 23, 2009

Location: Nebraska, United States

Posted: July 23, 2009 at 10:30 PM / IP Logged

Just grab your 12volt turn on from the ignition switch. I think it is BLACK/ light green for the accessory wire. Also fuse this connection.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 expedition, amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.