the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

memphis vs mb quart?


Post ReplyPost New Topic
< Prev Topic Next Topic >
asquarecan 
Copper - Posts: 64
Copper spacespace
Joined: November 25, 2008
Location: Oregon, United States
Posted: August 17, 2009 at 10:56 PM / IP Logged  
Hey guys,
I am getting ready to buy a new woofer, possibly 2 but I am trying to get some opinions.
I have narrowed it down between a set of memphis or MB Quart.
I am looking at either
1 of these
MB Quart
or 2 of these
Memphis
I am on a slight budget so I know there are better more expensive subs but this is the price range I am in. If any one as a better suggestion I am open to them too. I narrowed it down to these 2 due to the fact I can pick them up at my local shop.
Thanks
Keith
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: August 18, 2009 at 10:27 AM / IP Logged  
i would go for the MB quarts
paidnfull 
Copper - Posts: 125
Copper spacespace
Joined: October 24, 2007
Location: Texas, United States
Posted: August 18, 2009 at 12:03 PM / IP Logged  

The new quart stuff is made by maxxsonics.  ie: crunch, hifonics, autotek.  Not been too thrilled with anything they're putting out right now. 

I can't use your links at work, so I don't know which memphis speakers your looking at.  The higher end memphis stuff is pretty decent.

asquarecan 
Copper - Posts: 64
Copper spacespace
Joined: November 25, 2008
Location: Oregon, United States
Posted: August 18, 2009 at 3:06 PM / IP Logged  
They are the 12" Power Reference
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: August 18, 2009 at 3:39 PM / IP Logged  
it actually surprised me when i learned that MB Quart is made by maxxsonics because they still sound pretty good and their high end stuff is still high end. their line wasn't destroyed like autotek was when maxxsonics got ahold of them.
metaljoey 
Copper - Posts: 58
Copper spacespace
Joined: July 11, 2009
Location: Indiana, United States
Posted: August 19, 2009 at 12:06 AM / IP Logged  
 One of my Buddy's had 2 15'' Memphis Pr's in a sealed box w/ 1.5 cubes for each sub with a Lot of pollyfill. He was running a pr 1000 AMP @ 2 OHMS. So, like 600 RMS i think. it ran me out of his car. i didn't think $100 subs in a small sealed box & 600 RMS would do that!!! it was sick!   
Before you see the light, you must die!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer